SEC Plate and Frame Heat Exchangers are designed and built, to the highest standards (ASME - PED - CRN - TEMA). A plate and frame heat exchanger is a very efficient heat transfer device. Specially formed individual plates, normally of 0.5/0.6mm thickness are assembled to form the SEC Plate and Frame Heat Exchangers "plate pack." A gasket of suitable material, between the plates, seals the fluid and directs the flow. The end frames and heavy threaded rods compress the plate pak to create a highly effecient heat transfer device. The fluid flows through ports located on the frame(s). The location of these ports is dependant on the particular flow characteristics required by the heat transfer application.

SEC Heat Exchangers Plate and Frame Manuals in the Adobe Acrobat PDF format can be "Viewed and Printed Online."

View and Print Online: Plate and Frame (PHE) Manuals

Plate and Frame PHE Commissioning Manual
Plate and Frame PHE Installation Manual
Plate and Frame PHE Maintenance Manual
Plate and Frame PHE Operating Manual
Plate and Frame PHE Service Manual
SEC PHE Technical Drawings

If you would prefer to "Download and Install" the Plate and Frame Manuals use the following links.
All Installs can be Removed by the "Start/Settings/Control Panel/Add and Remove" applet in
Windows 98 / 98SE / ME / Win2K / NT 3.5-4.0 / XP Home and Pro.

Download and Install: Plate and Frame (PHE) Manuals

Plate and Frame PHE Commissioning Manual
Plate and Frame PHE Installation Manual
Plate and Frame PHE Maintenance Manual
Plate and Frame PHE Operating Manual
Plate and Frame PHE Service Manual

To "View and Print" other SEC Heat Exchangers Manuals, click here.

To "Download and Install" other SEC Heat Exchangers Manuals, click here.